Les produits Calorstat by Vernet sont conçus et fabriqués selon les critères de qualité les plus stricts.

CAPTEUR DE TEMPÉRATURE D'AIR

Measure the air temperature in the intake manifold of the engine

CONTACTEUR DE FEU STOP

Mechanical or pneumatic contactor, it puts on the stop lights of the car as soon as the driver presses on the « foot brake » pedal.

DURITE DE REFROIDISSEMENT

Connecting the radiator, the water pump and the engine, the cooling pipe complete the coolant cycle.

CAPTEUR D'ARBRE À CAMES ET DE VILEBREQUIN

Those sensors serve to measure the camshaft and crankshaft rotational speed and position

CABLE DE RALENTI ACCÉLERÉ

This system is used to the cold starting of the engine.

SONDE D’OXYGÈNE

Most modern vehicles can have until 6 Lambda sensors on the exhaust line.

CAPTEUR DE PRESSION

The engine’s performance depends on the right air fuel ratio.

MONOCONTACT D'HUILE

The oil pressure switch is normally closed. When the ignition is switched on, the oil pressure warning light illuminates.

BOUCHON DE RADIATEUR ET BOUCHON DE VASE D'EXPANSION

The radiator cap is made up of 2 valves, a pressure valve and a relief valve.

CONTACTEUR DE FEUX DE RECUL

There are two main types of reversing light switch.

CAPTEUR DE POSITION

It controls the amount of air that flows into an engine’s intake manifold.

THERMOCONTACT

Additional or complementary thermal sensor to the thermostat, it helps in the maintaining of the optimal temperature of the engine in case of overheat.

THERMOSTAT

The thermostat prevents excessive fuel consumption.

BOITIER DE SORTIE D’EAU

Cracking of the component's surface is the result of regular exposure to high temperatures.

MANOCONTACT D’EAU

Temperature sensor placed in the cooling circuit, it measures and gives the engine temperature.

VASE D'EXPANSION

In the sealed cooling system that’s present on most cars.